|
Material
|
Polypropylene BOPP OPP film, coated with water based acrylic adhesive,
solvent adhesive, hotmelt adhesive |
|
Thickness
|
From 28mic to100mic. Normal: 40mic, 45mic, 48mic, 50mic ect., or as required
|
|
Width
|
From 4mm to 1280mm. Normal: 45mm, 48mm, 50mm, 72mm ect., or as required
|
|
Length
|
From 10m to 8000m. Normal: 50m, 66m, 100m, 100y, 300m, 500m, 1000y ect., or as required
|
|
Type
|
Noisy tape, low noisy tape, silent tape, crystal clear, print brand logo ect.
|
|
Color
|
Clear, transparent, crystal clear, brown, colorful ect., or as required
|
|
Printed
|
Offer, can be printed 1-6 color mixed for logo
|
|
MOQ
|
500rolls depend on type
|
|
Certifications
|
ISO9001:2008, SGS, BV ect.,
|
|
Delivery time
|
Depends on the quantity, usually 5-15 days after deposit received
|
|
Payment term
|
30% deposit before production, 70% aganist copy of B/L. Accept:T/T, L/C, Paypal,
West Union and so on. |
|
Packaging
|
Normally Packaging:6rolls/shrink,36rolls/carton, 48rolls/carton, 50rolls or 72rolls/carton.
Special Packaging: Individual shrink, stick label, 1 roll with hand cutting machine or as required |
|
A few popular size
in global market |
48mmx50m/66m/100m–Asia
2″(48mm)x55y/110y–American 45mm/48mmx40m/50m/150–South Amerian 48mmx50mx66m–Europe 48mmx75m–Australian 48mmx90y/500y–Iran, Middle East 48mmx30y/100y/120y/130/300y/1000y–African |
|
custom made
|
Special size,color can be made according to customer’s requirement
|
Remove glue
alcohol
Dip a soft cloth or the like with a sufficient amount of 95% alcohol, and then gently wipe the sticker. The sticker will easily become soft and detach. At the same time, the alcohol will generally not cause any damage to the plastic parts or the surface of the car paint. But sometimes it is found that alcohol is not very effective on some stickers. This is to use a soft cloth dipped in a little gasoline to wipe the stickers. At this time, it should be noted that gasoline has a “dissolving” effect on certain plastics or paints. So you must use it carefully: Either lightly observe the unimportant place first, and use it if there is no problem; but be careful not to use too much gasoline, and at the same time try to keep the time as short as possible. Generally speaking, wiping with gasoline for a short time on the surface of the car body has no obvious effect on the paint film on the surface of the car body. In this way, the stickers are easily removed.
Fengyoujing
Apply some wind oil on the left mark and wipe it, which is more effective.
Scotch tape
Use scotch tape to stick it away without leaving a trace.
Glue remover
A bottle of glue remover is only more than 20 yuan, which can be used in many places and the use time is very long.
Gate tape
Use super glue paper to paste some decorations on the door, and then remove them, you can see that there are patches of glue marks on the door.
You can use gasoline or kerosene to wipe off the tape, or buy No. 1200 water sandpaper to spray water to wipe off the stains; buy a can of transparent varnish, dilute it with banana oil, and restore the brightness with one brush stroke. Do not use nail polish to wipe, although the glue stains can be removed, but unfortunately the door will become a white stain.
Remove the tape
First scrape off the tape with a knife, then wipe with petroleum spirit; scrape off the tape with frosted glass, and wipe with turpentine.
Remove trademark
There are always some labels on the newly bought stainless steel basins or glassware. After the labels are removed, the marks left by the stickers on them are difficult to remove. Wiping with a damp cloth or scraping with a knife will often leave marks. After practice, there are the following methods :
For the adhesive traces on the surface of hard objects, we can apply non-greasy nail polish remover to the surface of the object, and then gently wipe it with a soft cloth; these traces can also be removed with industrial alcohol or gasoline.
If these stickers get on the skin, you can also use lemon juice to remove them.
In addition, hand cream can also achieve the effect of removing stickers. Hand cream contains a lot of water (generally more than 70%), and the water contains a certain amount of surfactant. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the adhesive and the surface of the object to achieve the purpose of removal. Some similar products, such as facial creams, facial cleansers, and detergents have the same effect.
For the more stubborn stickers on the carpet, the best way is to carefully trim off the stickers on the top of the carpet fluff.
Production Method
The tape is based on the original BOPP film, after high-voltage corona, the surface is roughened on one side, glue is applied, and the tape is divided into small rolls. This is the tape we use every day. Tape glue is acrylic glue, also called pressure-sensitive adhesive, and its main component is butyl ester. Tincture is a kind of macromolecular active substance, and the temperature has a certain influence on molecular activity. The tincture content of the glue directly affects the use of the tape. The initial adhesive force of normal sealing tape is between No. 13 (steel ball number). The thickness of this tape glue is generally 22 microns, which is a standard thickness.
Colored tapes are used for marking and masking purposes. Generally, beige and khaki are more common. The color of the colored tape is the color of the glue.
Pinch the scotch tape and then quickly pull it apart, you can pull off the glue on one side, and you can see the purity and transparency of the original film.
